What's the best way to get the choke cable out. Do I have to take the whole dash off or can the heater be removed to get to the nut off the back. It's a 1980 van.
Attached Files
-
IMAG5234.jpg 48.75K
1 downloads
Choke Cable
Started by
StubyDoo
, May 06 2018 10:14 PM
2 replies to this topic
#1
StubyDoo
-
- Noobies
-
- 37 posts
On The Road
- Location: Leeds
Posted 06 May 2018 - 10:14 PM
#2
Swift_General
-
- Members
-
- 870 posts
One Carb Or Two?
- Location: England
Posted 07 May 2018 - 09:42 AM
Only need to remove the switch plate. 2 nuts either side, 5/16" AF if it recall correctly. Bit of a pain to get to - I use a 1/4" socket with a long extension.
Edited by Swift_General, 07 May 2018 - 09:42 AM.
#3
StubyDoo
-
- Noobies
-
- 37 posts
On The Road
- Location: Leeds
Posted 07 May 2018 - 03:20 PM
I managed to pull the switch plate forward enough to get a spanner on it. No more pegs to hold the choke out now :)
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users
