4 replies to this topic

[InnoCOOPER]

Setting up my Innocenti and looking at all the posts have been very helpful (thankyou Cooperman).  One question?  is the toe in figure quoted the total for both wheels or each side?

 

Using the the two strips of wood method i have 0.58" total toe out and i should have 0.5" so a little bit to much.

 

Thanks for you r help in advance.

Edited by InnoCOOPER, 19 May 2018 - 04:20 PM.

[carbon]

Toe-in and toe-out normally quoted as total.

 

For instance, 1/8 inch toe-out on front and1/16 inch toe-in on rear wheels.

[nicklouse]

both it depends on where you got them from.

[nicklouse]

 

total

[InnoCOOPER]

 

total

So 1/16" total toe out.   that would equate to 1.587mm say 1.6mm so 0.8mm toe out

on each wheel.