Hi there, Im just about to start a topic thats been covered many times before so please bare with me as I cant find a definitive answer.
I have a 1275 using a mg electronic distributor . One with the module screwed on the side,
Its in a stock car so the coil gets 12v and thats it, what coil should I be using? Ballast or non ballast or something else I literally have no clue what I should be buying
Any advice would be great
Cheers
Coil Choice
Started by
Decwhiteoak95
, May 22 2018 07:12 PM
4 replies to this topic
#1
Posted 22 May 2018 - 07:12 PM
#2
Posted 22 May 2018 - 07:20 PM
http://www.theminifo...tributor-types/
so if 12V it aint ballasted as the feeds the coil at 9v (pink wire)
#3
Posted 22 May 2018 - 09:14 PM
HI I've got the same distributor and just bought the Lucas DLB 198 this is specifically for the standard electronic distributor, about £18 on ebay.
Andy.
#4
Posted 22 May 2018 - 11:44 PM
GCL143 was the Unipart number
#5
Posted 23 May 2018 - 09:52 AM
GCL143 was the Unipart number
That's the number I always use, our cars run great with them
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users