Jump to content


Photo

Full Heelboard Or Just The Ends?


  • Please log in to reply
1 reply to this topic

#1 NDT

NDT

    On The Road

  • Noobies
  • PipPip
  • 39 posts

Posted 06 June 2018 - 08:40 AM

The ends of my heelboard are totally shot but rest of it is sound.

I've got a complete heelboard panel (from M-Machine so it's not a Heritage one).

Any reason to do the whole panel rather than just the ends? seems like a lot of spot welds to drill out!

I've also got got to do the inner and outer sills but was going to do the heelboard first.



#2 sonikk4

sonikk4

    Twisted Paint Polisher!!!

  • Admin
  • PipPipPipPipPipPipPipPipPipPipPip
  • 13,897 posts
  • Name: Neil
  • Location: Stone Cross
  • Local Club: EDMC

Posted 06 June 2018 - 01:43 PM

http://www.theminifo...nd-outer-sills/

 

Now if you have got a complete panel i would replace the complete thing, that way you will not get any variances in width. yes quite a few spot welds but as you are going to replace the inner and outer sills, doing it properly will create less potential issues.






0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users

Mini Spares