Hi guys/gals,
Currently got 12" 4 spoke Revolution on the mini and wondering what width they are. Not looking to replace them anyway though may refurb and colour change them from black to gold.
I thought 5" but not sure. I need to get some new arches too so this is why I'm wondering. I can't get to the garage to pop tyre off and check for a few weeks.
I took.a few pics for your thoughts, could they be 5.5"?
Also what arches would you recommend?
https://flic.kr/s/aHsmnvC3fn
Wheel Width Opinion
Started by
Theotherscottj
, Jun 17 2018 06:32 PM
7 replies to this topic
#1
Posted 17 June 2018 - 06:32 PM
#2
Posted 17 June 2018 - 06:51 PM
Can’t answer you directly but every wheel should have standardised coding detailing size and offset. Usually it’s stamped on the hub side of the rim somewhere.
Give this link a try
https://www.oponeo.c...-wheel-markings
—— edit
Ah sorry I didn’t read your post properly... oh well I leave the above there for general knowledge... :)
Give this link a try
https://www.oponeo.c...-wheel-markings
—— edit
Ah sorry I didn’t read your post properly... oh well I leave the above there for general knowledge... :)
Edited by superchiwawa, 17 June 2018 - 06:55 PM.
#3
Posted 17 June 2018 - 06:55 PM
I'll give it a look over when stops hammering down with rain. Tried to spy a stamp between spokes to no avail.
#4
Posted 17 June 2018 - 07:59 PM
take the wheel off. the info will be on the inside.
#5
Posted 17 June 2018 - 08:12 PM
Looks like only option. Typically the Jack and tools in garage.
With regard to arches was thinking about group 2 but unsure I do like the standard ones but as you can see from the link the wheel is poking out a little
With regard to arches was thinking about group 2 but unsure I do like the standard ones but as you can see from the link the wheel is poking out a little
#6
Posted 17 June 2018 - 08:18 PM
oh and if genuine they will be either 5 or 6 wide.
Overall Width 152
or
Overall Width 177
#7
Posted 17 June 2018 - 08:24 PM
I thought I'd read some older wheels came in 5.5" that not the case?
#8
Posted 17 June 2018 - 09:05 PM
They look like 6inch width, check on the inside of the hub, should have an ET Number(offset) and either 5 or 6 J
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users