You'll need a pair of these for the big day mate
haha love those! They are going to be the shopping list that's for sure...
Posted 14 July 2018 - 06:45 AM
You'll need a pair of these for the big day mate
haha love those! They are going to be the shopping list that's for sure...
Posted 14 July 2018 - 06:46 AM
Just won a set of new old stock door hinges of ebay, so once they have arrived we can get the door post all lined up. I am going to try and get the door step panel in this weekend, in between work. Itching to get something solid on this car...
Posted 14 July 2018 - 07:16 AM
I got em off amazon or ebay, can't remember which. I think they were about 13 quidhaha love those! They are going to be the shopping list that's for sure...You'll need a pair of these for the big day mate
Posted 15 July 2018 - 08:40 AM
I got em off amazon or ebay, can't remember which. I think they were about 13 quidhaha love those! They are going to be the shopping list that's for sure...You'll need a pair of these for the big day mate
Posted 16 July 2018 - 05:30 AM
We are now at the point that the door step can be tacked in now, so hoping that will be done this week and I can think about rebuilding the rest of that side then...
Posted 16 July 2018 - 11:07 AM
Posted 16 July 2018 - 11:24 AM
There’s no better feeling then when something starts going back together. I miss having a project and something to fettle with after work.
Yeah I no I just cant wait to see something solid in there lol sick of seeing the rust now... I get bored if I have nothing to muck about with after work.
Posted 16 July 2018 - 07:04 PM
We are now at the point that the door step can be tacked in now, so hoping that will be done this week and I can think about rebuilding the rest of that side then...
Posted 17 July 2018 - 05:41 AM
Got an hour or so on the mini last night and bit the bullet cut the whole corner out now, trimmed it all back, few more holes done ready for plug welding but after a few more small tweaks I am hoping to get this tacked in place later and double check the door fits nice then weld this in. Few pics of lining up in the inner closing panel and the door step itself.
Edited by minimissions, 20 July 2018 - 05:43 AM.
Posted 17 July 2018 - 07:19 AM
Posted 17 July 2018 - 11:37 AM
You need to slow down a bit, at this rate you'll be done before me
Haha no way your miles ahead of me! I think our dream of IMM in this mini is fading away...
Edited by minimissions, 17 July 2018 - 11:38 AM.
Posted 18 July 2018 - 08:32 AM
Got an hour or so on the mini last night and bit the bullet cut the whole corner out now, trimmed it all back, few more holes done ready for plug welding but after a few more small tweaks I am hoping to get this tacked in place later and double check the door fits nice then weld this in. Few pics of lining up in the inner closing panel and the door step itself.
Nice progress! I cannot wait to start cutting mine up but I will be a bit nervous at the same time! I think its all the lining up that I will be struggling with
Posted 18 July 2018 - 11:38 AM
Got an hour or so on the mini last night and bit the bullet cut the whole corner out now, trimmed it all back, few more holes done ready for plug welding but after a few more small tweaks I am hoping to get this tacked in place later and double check the door fits nice then weld this in. Few pics of lining up in the inner closing panel and the door step itself.
Nice progress! I cannot wait to start cutting mine up but I will be a bit nervous at the same time! I think its all the lining up that I will be struggling with
Dont worry I am the same, now got the task of sorting the door hinge panel out and getting the door to fit really not looking forward to that...
You will be fine just keep checking and taking your time..
Posted 18 July 2018 - 04:35 PM
Got an hour or so on the mini last night and bit the bullet cut the whole corner out now, trimmed it all back, few more holes done ready for plug welding but after a few more small tweaks I am hoping to get this tacked in place later and double check the door fits nice then weld this in. Few pics of lining up in the inner closing panel and the door step itself.
Nice progress! I cannot wait to start cutting mine up but I will be a bit nervous at the same time! I think its all the lining up that I will be struggling with
Dont worry I am the same, now got the task of sorting the door hinge panel out and getting the door to fit really not looking forward to that...
You will be fine just keep checking and taking your time..
I'm in no rush, im allowing 4 years on this build!
Well the panel gaps cannot be as bad as the factory ones!
Posted 19 July 2018 - 05:19 AM
Thats a good time scale, we have two years until the big day but stupidly put the imm 2019 as the deadline, I think it will be hard to make that one with the amount of panels this needs and the amount of free time i get..
0 members, 0 guests, 0 anonymous users