I've got one rust bubble on the wing of my car it was re sprayed around 4 years ago in vauxhall Arden Blue. The rest of the car is solid an I'm not keen to pull it apart. I dont however want to just leave this as a paint bubble so how best would I tackle this
Rust Bubble
Started by
malc_west
, Jun 29 2018 12:59 PM
4 replies to this topic
#1
Posted 29 June 2018 - 12:59 PM
#2
Posted 29 June 2018 - 01:30 PM
From what I know, deal with it asap. Sand down till bare metal, anti Rust, primer and paint. Even if it's not a perfect job, always better than spreading rust ;)
#3
Posted 29 June 2018 - 03:33 PM
It depends which side started rusting first, if from the back then it will probably go through when you sand it. Nothing to lose by scraping off paint, sanding and putting some epoxy on it, but I would clean and paint both sides.
#4
Posted 29 June 2018 - 04:54 PM
clean it weld it fill it prime it paint it
#5
Posted 29 June 2018 - 07:02 PM
Cheers lads
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users