13 replies to this topic

[bluemini1979]

I have decided to sell my 7 port head. It is a webcon version that is the same as the pierce moulds.
I haven’t run the head on the road but it has been on the engine and run for a short time (1/2 hour max). It is as supplied by webcon. I had it on twin 40 Weber’s which bolt directly to the head using misab plates. It fits under a standard non flip front round nose with short trumpets on the Weber’s. I am only selling as I have decided to go down the forced induction route which I already have the head for otherwise I would have had this one re machined.
I’m located in Halstead Essex but still have the original packaging so I am happy to post at buyers expense. £1000 no offers.
Any questions just ask. Link to the head from webcon http://www.webcon.co...opexd.asp?id=35

Attached Files

•  50667895-9F9C-4F6A-949B-69183AFF7A46.jpeg   34.59K   20 downloads
•  25EB4EB0-58EA-48F2-AF5D-0B7818E8AE16.jpeg   36.16K   19 downloads
•  829C6172-6388-480B-B1FB-ECA94EEE63CB.jpeg   84.55K   7 downloads
•  45899584-C86D-472C-99F1-D4358E6FD9F3.jpeg   84.47K   5 downloads

[screech]

Got any photos of the ports?

[bluemini1979]

Got any photos of the ports?

Inlet, exhaust ports or both? I can stop by my workshop tomorrow and get some for you.

[Gr4h4m]

What cc are the chambers

what size valves does it have

[bluemini1979]

Inlet valves 33mm exhaust valves 29mm. Chambers are 23cc

[screech]

Got any photos of the ports?

Inlet, exhaust ports or both? I can stop by my workshop tomorrow and get some for you.

Both please.

You sure inlet valves are only 33mm?

[screech]

Got any photos of the ports?

Inlet, exhaust ports or both? I can stop by my workshop tomorrow and get some for you.

[bluemini1979]

Got any photos of the ports?

Inlet, exhaust ports or both? I can stop by my workshop tomorrow and get some for you.

Both please.

You sure inlet valves are only 33mm?

Yeah I’m sure they are I can re measure them tomorrow for you.

[mini13]

33mm is the standard size finlet valve for these, although a lot of users put larger in there.

 

OP could always turbo the 7 port.....

[paulk 7364]

Hi, what I need to do to use this on my 1275 engine
Hiff 44 carb sw5 cam . What sort of bhp could I achieve
With the wright parts ?
Thanks from a not a well informed mini enthusiast

[bluemini1979]

Hi, what I need to do to use this on my 1275 engine
Hiff 44 carb sw5 cam . What sort of bhp could I achieve
With the wright parts ?
Thanks from a not a well informed mini enthusiast

To use on Your engine you would need to source suitable Weber carbs or throttle bodies if you wanted fuel injection, sw5 should work well as that is what I had in mine. Power wise you would make more than what your 5 port is making as long as it is set up well.

[bluemini1979]

Got any photos of the ports?

Photos of the ports

Attached Files

•  42C46EBA-1C4F-42A6-A0BC-FF28D968962E.jpeg   38.12K   4 downloads
•  CC7DA44E-EB94-4056-94F6-DDA1B13B6F28.jpeg   32.16K   5 downloads
•  C8E29BF0-CBCA-4981-9B73-2C768E76DC47.jpeg   28.39K   7 downloads
•  8E6C5096-5FFF-4797-B502-EEA1FE09EB2F.jpeg   27.59K   6 downloads

[screech]

Thank you.

[Boom!]

Do you still have this?