I am just about to refit my front subframe, it is an early type with two bolts in each tower. Is there anything that goes between the top of the towers and the underside of the crossmember? Thanks.
Front Subframe Fitting.
Started by
mark the diver
, Jul 12 2018 03:20 PM
Best Answer Spider , 12 July 2018 - 07:29 PM
For the Dry Subframes, there is a spacer, it's about 5 mm thick.
http://www.minispare...px|Back to shop
It's not used with wet frames.
2 replies to this topic
#2
Spider
-
- Admin
-
- 13,900 posts
Moved Into The Garage
- Location: NSW
- Local Club: South Australian Moke Club
Posted 12 July 2018 - 07:29 PM Best Answer
For the Dry Subframes, there is a spacer, it's about 5 mm thick.
http://www.minispare...px|Back to shop
It's not used with wet frames.
#3
mark the diver
-
- TMF+ Member
-
- 40 posts
On The Road
- Location: kent
Posted 13 July 2018 - 01:17 PM
That's great, thanks.
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users
