Jump to content


Photo
- - - - -

Gear Selector


  • Please log in to reply
20 replies to this topic

#16 Bat

Bat

    One Carb Or Two?

  • Members
  • PipPipPipPipPipPipPip
  • 903 posts
  • Location: Bermingum

Posted 17 July 2018 - 09:52 AM

Hi,

Bolt the side cover on to compress the spring and give it a try.

Cheers  :proud:



#17 germini30

germini30

    Super Mini Mad

  • TMF+ Member
  • PipPipPipPipPipPip
  • 658 posts

Posted 17 July 2018 - 01:11 PM

It'll move back and forth but not twist. Like it goes into 1st and 2nd but won't twist across to 3rd and 4th

#18 Thelowrider

Thelowrider

    Stage One Kit Fitted

  • Just Joined
  • PipPipPip
  • 90 posts
  • Location: Nottingham

Posted 17 July 2018 - 06:17 PM

Guys, does this look right and if so how can I be sure all gears will select OK


Fairly ceration by the picture that the selector still needs to rotate round more.

Edited by Thelowrider, 17 July 2018 - 06:18 PM.


#19 Spider

Spider

    Moved Into The Garage

  • Admin
  • PipPipPipPipPipPipPipPipPipPipPip
  • 13,844 posts
  • Location: NSW
  • Local Club: South Australian Moke Club

Posted 17 July 2018 - 06:23 PM

Check the Reverse Idler Gear is all the way out and nestled in to the gearbox web.



#20 germini30

germini30

    Super Mini Mad

  • TMF+ Member
  • PipPipPipPipPipPip
  • 658 posts

Posted 17 July 2018 - 08:58 PM

Got it working, I hope. Basically the half moon shapes slide between the selectors. I can push forward, back and then twist the rod so that it then operates the other selector. Also if I twist it all the way to the right and push it will operate a lever and slide a gear at the front of the box (reverse I presume)

Attached Files



#21 Retroman

Retroman

    One Carb Or Two?

  • Traders
  • PipPipPipPipPipPipPip
  • 967 posts
  • Location: Sunny Sabden
  • Local Club: CDMC

Posted 17 July 2018 - 11:25 PM

Correct, sounds like its all working fine, the last photo shows it in 1st gear






1 user(s) are reading this topic

0 members, 1 guests, 0 anonymous users