What is a good thickness of steel to use for patches around the mini bulkhead
Mini Panel
Started by
Scott Brown
, Jul 18 2018 08:26 PM
4 replies to this topic
#1
Posted 18 July 2018 - 08:26 PM
#2
Posted 18 July 2018 - 09:12 PM
I use 1.0mm - 1.2mm
#3
Posted 19 July 2018 - 11:51 AM
Crossmember is a minimum of 1.2mm the actual bulkhead should be 0.9mm.
#4
Posted 19 July 2018 - 11:55 AM
Thank you both for your help
#5
Posted 19 July 2018 - 11:58 AM
Thank you both for your help
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users