12G1128 4 Synchro Gearbox And Other Bits
#1
Posted 27 July 2018 - 10:56 AM
In fact everything that Mab01 shows here http://www.theminifo...remote-gearbox/
All to convert my woody but keep the magic wand.
WHY?
FS
#2
Posted 31 July 2018 - 07:17 AM
there is a 1128 box fitted with the wand from the factory
it was fitted to some vans
#3
Posted 22 August 2018 - 09:47 AM
Got a box now need the pipe, adaptor plate, Bush etc
FS
#4
Posted 22 August 2018 - 12:49 PM
also, somthing i didnt realize til recently, there is a wand type change that bolts on to the remote box , it was used in the last of the vans apparently.
se below
https://www.minispar...nge.aspx?1~4~43
#5
Posted 22 August 2018 - 03:32 PM
isnt that a conversion kit none factory!!!
#6
Posted 22 August 2018 - 08:10 PM
Any one?
FS
#7
Posted 07 October 2018 - 10:14 AM
FS
#8
Posted 14 October 2018 - 06:44 AM
FS
#9
Posted 20 October 2018 - 02:58 PM
#10
Posted 20 October 2018 - 08:37 PM
Does it have to be a Mini 'box or would an ADO16 sandwich plate type 1128 do ?
#11
Posted 21 October 2018 - 07:05 AM
Presuming everything asked for is to be assembled together, the wand conversion won’t fit the ADO16 diff casing
Edited by GraemeC, 29 October 2018 - 08:18 AM.
#12
Posted 28 October 2018 - 12:47 PM
Needing gearstick, “pipe” and bush
Part numbers
Shaft 88G553 (looks like a pipe)
Gearstick 22A1382 (slot at the top not side)
Seat 22A1832
Bush 22A1377
Sleeve 22A1378
FS
#13
Posted 16 November 2018 - 07:45 AM
#14
Posted 16 November 2018 - 10:10 AM
I can send his info if you pm me.
#15
Posted 12 January 2019 - 10:07 PM
Good shout reduced the number if bits needed!Have you tried Nick Rogers at mini-bitz?
I can send his info if you pm me.
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users