21 replies to this topic

[NDT]

I bought mine from rolloverjigs - it’s brilliant.
I also got the (expensive) castor kit so you can wheel it around, plus the self loading tool.
All are really good.
Only selling because I’ve sent the shell off to be restored by a professional!

[poohbah]

I second rolloverjigs too.  £270 for a mini jig.

[stumpy75]

I bought mine from rolloverjigs - it’s brilliant.
I also got the (expensive) castor kit so you can wheel it around, plus the self loading tool.
All are really good.
Only selling because I’ve sent the shell off to be restored by a professional!

Do you have pics of the self loading tool

[NDT]

 

I bought mine from rolloverjigs - it’s brilliant.
I also got the (expensive) castor kit so you can wheel it around, plus the self loading tool.
All are really good.
Only selling because I’ve sent the shell off to be restored by a professional!

Do you have pics of the self loading tool

 

yes if I could work out how to load it!

[alchall]

I also had the rollover jig and the self loading tool, well worth the money and I simply sold it on and got some of the "investment" back when I was finished with it.

[NDT]

Mines going on ebay.

[NuFab]

I made my own, similar to some of the ones above... I did it in timber. Steel tube through the middle of the car with plates bolted to the car for it to run through, then mounts on the timber as well. The whole thing was on castors so I could move it across the garage to work on each side.