1 reply to this topic

[Avtovaz]

Ive bought the m machine floor to first rib with inner/outer sills etc all in one. Now what s the best way to fit them? I am not sure about where the rear bin is, Should i cut the inner sill down, step whats there fit the floor and take out the bin when im done and weld it up. Or take the bin out now and do it all in one go. Not sure as i havnt braced it much atm, so the door bin i think is keeping everything ok.

 

thanks

[harrythehat]

have a look at the pinned topic on fitting cills its most usefull

doing that job at the mo, and more involved than u may  think