20 replies to this topic

[stumpy75]

Need to replace the steps inner cills and two half floor full length both sides awkward with the cage fitted

Attached Files

•  20181219_122258.jpg   47.88K   2 downloads
•  20181219_122308.jpg   34.87K   2 downloads
•  20181219_122316.jpg   44.2K   2 downloads

[stumpy75]

Tight

Attached Files

•  20181219_122324.jpg   43.19K   0 downloads
•  20181219_122331.jpg   27.09K   1 downloads
•  20181219_122344.jpg   31.64K   2 downloads

[stumpy75]

Finally got time to make a start on this needs the roof sorting horrible cover cills cut down to 4 inches the both front floors and outer 12 inches so i will be fitting two full length half floors a full bulkhead box new cills steps boot floor undecided on power thinking tuned A series

Edited by stumpy75, 21 March 2019 - 06:21 PM.

[stumpy75]

May have to stitch weld inner cill to doorstep due to access

Edited by stumpy75, 13 May 2019 - 04:51 PM.

[stumpy75]

So a question for you how do you weld in new floor pans full length with a rollcage fitted what have ynu guys done i dont want to ruin the cage

Edited by stumpy75, 13 May 2019 - 04:50 PM.

[johnR]

Presumably you'll need to connect the cage to the roof if it's not already, then with shell upsidedown cut the old floor off the cage feet and weld the new floor on.