Would this fit..??
Started by
miniman5
, Aug 07 2004 01:57 PM
29 replies to this topic
#16
Posted 08 August 2004 - 08:18 PM
i cant afford the kit, how much would postage be to west yorkshire?
#17
Posted 09 August 2004 - 09:11 AM
If you don't want the whole Stage 1 kit then just buy the exhaust and link pipe.
You can't use your original inlet as both manifolds are cast in one piece. They can be cut apart but it's very tricky and not satisfactory as you'll end up with a good exhaust manifold and a C**p inlet.
If P&L don't sell the orignal Minispares adapter they may sell the Playmini one which I think is called Magic Pipe.
If you wan't to save postage you could buy most of it locally and just the bits you have to from Minispares. Why not ask Minispares how much they'll charge for postage? I don't think I've ever paid more than £15 for next day, and I've ordered some pretty big stuff.
I agree that their website is rubbish though, hardly any of the catalogue is on there. I always phone them, it's easier (unless you get the useless old girl on the phone who knows nothing).
You can't use your original inlet as both manifolds are cast in one piece. They can be cut apart but it's very tricky and not satisfactory as you'll end up with a good exhaust manifold and a C**p inlet.
If P&L don't sell the orignal Minispares adapter they may sell the Playmini one which I think is called Magic Pipe.
If you wan't to save postage you could buy most of it locally and just the bits you have to from Minispares. Why not ask Minispares how much they'll charge for postage? I don't think I've ever paid more than £15 for next day, and I've ordered some pretty big stuff.
I agree that their website is rubbish though, hardly any of the catalogue is on there. I always phone them, it's easier (unless you get the useless old girl on the phone who knows nothing).
#18
Posted 09 August 2004 - 11:23 AM
he he!
#19
Posted 11 August 2004 - 12:47 PM
Yo the closest single i can find is a 2" is that still to big??
https://www.midlandw...php?product=XB1
are they hard to fit??
https://www.midlandw...php?product=XB1
are they hard to fit??
#20
Posted 11 August 2004 - 04:37 PM
Look, silly, 2" is the diameter of the tailpipe, it's a 'STD Bore' (standard bore) connection, so it will fit your car.
#21
Posted 11 August 2004 - 04:53 PM
who u callign silly! :tongue: with an avatar like that! :tongue: only kiden so it dont realy mate rwat diaminet it is then??
#22
Posted 11 August 2004 - 04:55 PM
how much is an LCB for fitting with an RC40 exhaust?
#23
Posted 11 August 2004 - 05:18 PM
£40-150 depending on make etc
#24
Posted 11 August 2004 - 06:52 PM
AHHHHHHHHHHH!!! DAM IT!! no ones lisning to me!
#25
Posted 11 August 2004 - 09:42 PM
Oh yeah, and this was your thread too!
Erm, you should be okay with that. You might even be okay with the 3", but you will still be loosing a little grunt even though it's only the tail pipe. The biggest tailpipe on an RC40 is 2 1/4", but that's for looks not best performance. The stage 1 kit uses the standard 1 3/4" RC40 and they did lots of work developing that.
If you don't mind loosing a few ponies at the top end and a bit of torque lower down, and you like the look of it then go for it.
Erm, you should be okay with that. You might even be okay with the 3", but you will still be loosing a little grunt even though it's only the tail pipe. The biggest tailpipe on an RC40 is 2 1/4", but that's for looks not best performance. The stage 1 kit uses the standard 1 3/4" RC40 and they did lots of work developing that.
If you don't mind loosing a few ponies at the top end and a bit of torque lower down, and you like the look of it then go for it.
#26
Posted 12 August 2004 - 06:31 AM
i can always change sumat else to compensate cant it.will it sound good?
#27
Posted 12 August 2004 - 09:14 AM
I just ordered a standard neck to RC40 adaptor, with a 1.75" straight thru pipe, with a centre exit back box (2 1/4" round)
Only got single box instead of double, so i hope its not too loud.
Only got single box instead of double, so i hope its not too loud.
#28
Posted 12 August 2004 - 06:21 PM
You can never have a mini thats to loud!!
#29
Posted 12 August 2004 - 11:02 PM
twin dtm, 998 cc going down the road, now thats a dreadful sound, just fork out on an rc40, thats what im gona do. function over look.
#30
Posted 13 August 2004 - 07:53 AM
i want sumat loud tho so when im over the other side of town not sticking to the speed limmit my dad can still here me from home!
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users