Jump to content


Photo
- - - - -

Z16Se Conversion Mini Clutch Master To F13 Gearbox Slave Hose


  • Please log in to reply
No replies to this topic

#1 topwaxer

topwaxer

    Stage One Kit Fitted

  • Noobies
  • PipPipPip
  • 73 posts
  • Local Club: spamfritter mini club

Posted 07 November 2018 - 06:56 PM

Hi All,

 

After a 3 year break from the mini i have got the bug back  :D . after previously running different engines from 998 to 1380 some of which were supercharged i decided for reliability to go down the vauxhall route.

The current state is the allspeed subframe is installed and i have a z16se engine which i am going to mate to a f13 3.55 gearbox and then run on bike carbs  I have hit a slight snag with how to connect the mini clutch master cylinder (VERTO)  to the Vauhall f13 gearbox slave cylinder. I am assuming that this is achievable and that i need to get a hose with the mini connection one end and the vauxhall on the other. If i am correct  does anyone know where i can get this hose made? I have looked around online for ages and took a trip down to pressure lines to see if they could make one, but no joy there.

 

sorry if Ive missed something obvious but really could do with some advice from anyone that's already done this.

 

Thanks

 

Mat






1 user(s) are reading this topic

0 members, 1 guests, 0 anonymous users