19 replies to this topic

[ochumi]

can help me with the headlamp levelling wire codes?

i have

GREEN        BROWN        BROWN

WHITE       WHITE-RED   YELLOW

 

THANKS

[nicklouse]

 colour.JPG   39.31K   6 downloads

 level.JPG   40.43K   8 downloads

 

to be honest a bit more car info would help.

Edited by nicklouse, 07 November 2018 - 08:12 PM.

[Bat]

Hola,

Buena noches.

Most of the colours you have are not head light leveling. See the diagram below.

Estoy en Pinoso.

Gracias 

 

 Screenshot_2018-11-07-21-17-35-306.jpeg   31.25K   7 downloads

[Bat]

Hi,

Nick beat me to it!

Cheers 

[nicklouse]

there is also the German version that uses different colours as well see in here http://www.theminifo...agrams-redrawn/

[ochumi]

first of all thanks

but i dont have the same wiring colors

[nicklouse]

like I have already said we need more info model year etc.........

[ochumi]

like I have already said we need more info model year etc.........

i don´t know i bought the levelling on ebay if not i´ve already said, and im doing a handmade wiring...  but thanks

Edited by ochumi, 09 November 2018 - 11:28 AM.

[GraemeC]

They are very odd colours to go to a Headlamp switch in a Mini (or indeed any car following Lucas conventions)

 

Normally:

 

Brown - permanent live

White - Ignition live

White/Red - Switched starter motor trigger

Green - fused accessory live

Yellow - not sure!

 

I would suggest the plug you have been given, although the right type for the switch, has actually been cut from elsewhere on the loom and should connect to the ignition barrel.

[nicklouse]

 

like I have already said we need more info model year etc.........

i don´t know i boght the levelling on ebay if not i´ve already said, and im doing a handmade wiring...  4 but thanks

 

Then time to get your multimeter out.

[ochumi]

yep but on diagram i see 4 conections and i have 6...

[Bat]

Hi,

That's a plug from a metro heater fan switch!

You'll need to look in the mpi workshop manual to find out which position the wires go into the socket so you can wire it up to the colours you have.

Cheers 

[Wiggy]

If I remember, I'll take mine out and grab a snap tomoz.

[nicklouse]

Hi,
That's a plug from a metro heater fan switch!
You'll need to look in the mpi workshop manual to find out which position the wires go into the socket so you can wire it up to the colours you have.
Cheers 

dont seem to match up with the Metro diagrams i have.

[GraemeC]

I’d agree - those wire colour would never go to a heater fan switch in BL/Rover car.

Again, it’s an ignition switch plug. Page 8:
http://www.theminifo...ttach_id=193892