73.5mm bore A+ block with CMS and decent high tensile bolts
MiniSpares C-STR312 ‘Mega’ 73.5mm pistons which use Omega rings
The bores show no discernible signs of wear and there is no lip.
Very nicely worked MSPD crank & rods - excellent condition crank tail. Rod bolts are ARP.
Big ends are at STD. The one big end cap I took off shows that the bearings here are in really good order and would go again.
Mains bearings are +0.010" - do show some signs of wear and would possibly benefit from the journals having a polish.
SW5 cam (reground on KC256). No followers.
Water pump is MiniSpares Evo type.
Std A+ push rods (stored in number order to they can go back in the correct places).
Std duplex timing gears
I will provide gasket set.
SOLD
Location - LA5 postcode
Edited by GraemeC, 23 December 2018 - 01:04 PM.