Top Dash Rail
Posted 12 March 2019 - 03:31 PM
Posted 13 March 2019 - 09:32 AM
The ends of the top rail rail seem to be just butted up against the A pillar and tack welded to it. It looks like all the support comes from being spot welded to the scuttle panel.
Posted 14 March 2019 - 07:38 PM
Posted 15 March 2019 - 06:28 PM
Hope you don’t mind me jumping on this thread. Mine shows signs of corrosion but wasn’t sure whether it needed replacing, is it structural?
I think there’s probably nasties hiding under there
Posted 15 March 2019 - 09:31 PM
Posted 19 March 2019 - 09:52 AM
Posted 24 March 2019 - 05:04 PM
Posted 30 March 2019 - 07:39 AM
My problem is that after getting the vent off I was cleaning up the area and this piece dropped out, it can’t have ever been secured that well, is it structural? Looks like it had been spotted in two places, I want to repair what I have rather than replace whole panels, this rust is very localised.
Posted 30 March 2019 - 07:46 AM
Posted 31 March 2019 - 10:27 AM
The bit that has dropped out looks like the closing panel that fits into the corners of the scuttle panel and stops mud and water from getting inside from the front wheel arch. If you look under the wheel arch, in the top rear corner you should see a large hole.
I'd be very surprised if you are not looking at a new inner wing, scuttle end panel and closing panel at the very least.
Posted 31 March 2019 - 12:12 PM
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users