Jump to content


Photo

Oem Rover Dash Clips - How Do They Work?


  • Please log in to reply
5 replies to this topic

#1 Booska

Booska

    Learner Driver

  • Noobies
  • PipPip
  • 10 posts
  • Location: Southern California

Posted 05 April 2019 - 09:44 PM

I recently ordered these clips from Dash of Colour in the UK. They didn't come with instructions and I've got a note out to the seller but hoping someone here might be able to guide me?

 

Thanks in advance

Attached Files



#2 RedRuby

RedRuby

    One Carb Or Two?

  • Members
  • PipPipPipPipPipPipPip
  • 1,201 posts
  • Location: County Durham
  • Local Club: No

Posted 05 April 2019 - 10:00 PM

Never seen the Aluminium ones before but the rubber/plastic wedges are fitted to the later wooden dashboards fitted to MPi coopers and then only one of them. It is screwed to the top of the dash in the centre above the small guage(s) the clock, volt meter, oil temp. It is fitted with the serrated side upper most and when the dash is installed it provides a firm fixing on the underside of the top dash rail. There are then usually two metal brackets screwed to the back of the dash near each end close to the air vents these brackets then bolt to the lower dash rail.

Edited by RedRuby, 05 April 2019 - 10:01 PM.


#3 panky

panky

    Camshaft & Stage Two Head

  • Members
  • PipPipPipPipPipPipPipPip
  • 1,776 posts
  • Location: Cheshire
  • Local Club: Northwest Casual Classics

Posted 05 April 2019 - 10:01 PM

Just been mentioned on another thread

 

http://www.theminifo...s/#entry3591071



#4 MikeRotherham

MikeRotherham

    One Carb Or Two?

  • TMF+ Member
  • PipPipPipPipPipPipPip
  • 939 posts
  • Location: Westwoodside North Lincs

Posted 06 April 2019 - 07:30 AM

I posted this earlier on another thread.

 

 

DSCF0010_zpsvv9lvjhk.jpg[/


Edited by MikeRotherham, 06 April 2019 - 07:32 AM.


#5 Booska

Booska

    Learner Driver

  • Noobies
  • PipPip
  • 10 posts
  • Location: Southern California

Posted 08 April 2019 - 03:56 PM

Thanks all. I flipped my dash over and can see where the serrated ones were originally mounted. I think I know where the aluminum ones go too. I will post pict once I've refinished the dash. 



#6 Rallye67

Rallye67

    On The Road

  • Noobies
  • PipPip
  • 46 posts
  • Location: shipley west yorks

Posted 11 September 2019 - 04:10 PM

ordered some today from dash of colour , really help full people






1 user(s) are reading this topic

0 members, 1 guests, 0 anonymous users