Jump to content


Photo

R1 Motor In Front But Rwd


  • Please log in to reply
58 replies to this topic

#1 hotwheels

hotwheels

    Mini Mad

  • Noobies
  • PipPipPipPip
  • 139 posts
  • Location: Pawtucket, RI

Posted 11 April 2019 - 02:34 AM

Just like to share what im currently working on!! Cheers 😁
https://youtu.be/w1ZMATDZfe0

#2 hotwheels

hotwheels

    Mini Mad

  • Noobies
  • PipPipPipPip
  • 139 posts
  • Location: Pawtucket, RI

Posted 14 April 2019 - 02:09 AM

Part 2 is now up

https://youtu.be/SwQ5qPzPvL8

#3 hotwheels

hotwheels

    Mini Mad

  • Noobies
  • PipPipPipPip
  • 139 posts
  • Location: Pawtucket, RI

Posted 15 April 2019 - 12:24 PM

Part 3 is up now as well. I started this project mid November 2018 and i had a bunch of random footage and just recently decided to throw them together to make short videos. Now that part 3 is up. Im pretty much up to date on the build now. Thanks for watching 😁😬🙏🏻

https://youtu.be/5BWrkUI41NY

#4 hotwheels

hotwheels

    Mini Mad

  • Noobies
  • PipPipPipPip
  • 139 posts
  • Location: Pawtucket, RI

Posted 20 April 2019 - 01:40 AM

Part 4 now up. Basically started tubing in the boot so i can get an idea about a fuel cell later on. Cheers!!

https://youtu.be/Enr4_fHlJBg

#5 joakwin

joakwin

    One Carb Or Two?

  • Members
  • PipPipPipPipPipPipPip
  • 940 posts
  • Location: Tucson, AZ

Posted 21 April 2019 - 04:10 AM

card board is the truth when building new brackets, nice work 



#6 hotwheels

hotwheels

    Mini Mad

  • Noobies
  • PipPipPipPip
  • 139 posts
  • Location: Pawtucket, RI

Posted 22 April 2019 - 03:49 AM

Thank you so much. I learned alot from watching project binky. 😁👌🏻

#7 Aceslow

Aceslow

    Mini Mad

  • Members
  • PipPipPipPip
  • 152 posts

Posted 22 April 2019 - 08:10 AM

I had thoughts of doing this to my Pickup.  Where did you purchase the R1 outputshaft adapter?  I have seen similar stuff for legends cars but not one for the R1



#8 hotwheels

hotwheels

    Mini Mad

  • Noobies
  • PipPipPipPip
  • 139 posts
  • Location: Pawtucket, RI

Posted 22 April 2019 - 12:36 PM

This website http://www.andrewsmotorsports.com sells them. There a bit pricey but i found mine used on facebook market place for 15$ what a steel!!

#9 hotwheels

hotwheels

    Mini Mad

  • Noobies
  • PipPipPipPip
  • 139 posts
  • Location: Pawtucket, RI

Posted 22 April 2019 - 08:36 PM

Really stoked about this one you guys. Exhaust part is 90 percent done. Full montage check it out!! Cheers 🍻

https://youtu.be/GPz6yMhlXPY

#10 hotwheels

hotwheels

    Mini Mad

  • Noobies
  • PipPipPipPip
  • 139 posts
  • Location: Pawtucket, RI

Posted 22 April 2019 - 08:37 PM

.

Edited by hotwheels, 22 April 2019 - 08:38 PM.


#11 joyce1bro

joyce1bro

    Mini Mad

  • Members
  • PipPipPipPip
  • 175 posts
  • Location: Hamilton
  • Local Club: Waikato Mini Club

Posted 26 April 2019 - 08:48 AM

That tinder match on episode one had me rolling on the floor Hahahaha. 👌👌👌👌

#12 hotwheels

hotwheels

    Mini Mad

  • Noobies
  • PipPipPipPip
  • 139 posts
  • Location: Pawtucket, RI

Posted 26 April 2019 - 11:43 AM

Lmao 😂 i thought some people might get a kick out of it hahah.

#13 PORKPI626

PORKPI626

    Starting My Mini Up

  • Noobies
  • Pip
  • 1 posts
  • Location: Wanganui

Posted 29 April 2019 - 07:06 AM

Nice project. I'm in the process of putting a zx10 engine in a clubman. was going to put the engine in the back when one of the boys at work suggested getting a diff from something that uses IRS and keeping the engine in the front. What is your diff out of if you don't mind me asking? I think this looks a lot less complex than how everyone else does the RWD swaps.

 

Side note I was looking into this https://shop.quaife....e-reversing-box which would make it pretty simple fit.



#14 hotwheels

hotwheels

    Mini Mad

  • Noobies
  • PipPipPipPip
  • 139 posts
  • Location: Pawtucket, RI

Posted 01 May 2019 - 03:06 AM

The boot is finally tubed in 😬😁
Part 6 is now up!!
https://youtu.be/k8g5oT3dlPI

#15 evolone38

evolone38

    Stage One Kit Fitted

  • Noobies
  • PipPipPip
  • 72 posts
  • Location: Canby

Posted 03 May 2019 - 05:18 AM

I follow on IG.. skills on the Mini and 20".

 

Doom beat / part 6 = banger






0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users

Mini Spares