Jump to content


Photo

Rc40 Link Pipe And Lcb Manifold


  • This topic is locked This topic is locked
6 replies to this topic

#1 Trissy B

Trissy B

    Speeding Along Now

  • Members
  • PipPipPipPipPip
  • 380 posts
  • Location: West Sussex
  • Local Club: Bognor Regis Motor Club

Posted 14 April 2019 - 09:09 AM

Hi I have a complete RC40 1.75" exhaust (single box) with LCB manifold for carb models. The rear box is shot but new ones aren't too expensive. Everything else is used an rusty but is in good working order with plenty of life left in it.

 

£20

 

Pickup from Lancing West Sussex

 

[/url]IMG_20190414_092906 by Trissy B, on Flickr">http://<a href='http....kr/p/2frZxq7'>47551826762_57fc770461_k.jpgIMG_20190414_092906 by Trissy B, on Flickr



#2 monkey

monkey

    One Carb Or Two?

  • Members
  • PipPipPipPipPipPipPip
  • 1,382 posts
  • Location: Diss, Norfolk
  • Local Club: Diss Mini Club

Posted 05 May 2019 - 05:33 PM

I’m guessing you won’t post? lol

#3 Trissy B

Trissy B

    Speeding Along Now

  • Members
  • PipPipPipPipPip
  • 380 posts
  • Location: West Sussex
  • Local Club: Bognor Regis Motor Club

Posted 10 May 2019 - 01:08 PM

I’m guessing you won’t post? lol

 

I can cut it up into 500mm sections and you can weld it up!!  ;D

 

In seriousness i could post the LCB if you wanted it. 



#4 monkey

monkey

    One Carb Or Two?

  • Members
  • PipPipPipPipPipPipPip
  • 1,382 posts
  • Location: Diss, Norfolk
  • Local Club: Diss Mini Club

Posted 11 May 2019 - 03:49 PM

Lol, don’t fancy welding each section back together but the lcb posted would be great! How much do you think it will cost?

#5 monkey

monkey

    One Carb Or Two?

  • Members
  • PipPipPipPipPipPipPip
  • 1,382 posts
  • Location: Diss, Norfolk
  • Local Club: Diss Mini Club

Posted 11 May 2019 - 03:55 PM

Although just read that LCBs ain’t great for the 998, mine is a standard 998 at the moment

#6 Trissy B

Trissy B

    Speeding Along Now

  • Members
  • PipPipPipPipPip
  • 380 posts
  • Location: West Sussex
  • Local Club: Bognor Regis Motor Club

Posted 14 May 2019 - 12:30 PM

Although just read that LCBs ain’t great for the 998, mine is a standard 998 at the moment

 

Hi there, sorry I had missed this message. I suspect postage will be about £10. Provided i can get the Y piece of the exhaust link pipe, you can have that for a tenner.

 

Umm people do say that but this was on my 998 for many years with no issues. Seemed to go well with an RC40, K&N air filter, 12G295 head and MG camshaft.


Edited by Trissy B, 14 May 2019 - 12:32 PM.


#7 Trissy B

Trissy B

    Speeding Along Now

  • Members
  • PipPipPipPipPip
  • 380 posts
  • Location: West Sussex
  • Local Club: Bognor Regis Motor Club

Posted 20 May 2019 - 07:57 PM

Sold.




0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users