5 replies to this topic

[ggdtr5]

Consisting of:-
Lightened flywheel
pressure plate
New clutch friction plate+ Cover plate (new)
used friction plate
New slave cylinder
Retaining spring and brackets
Long actuating arm
Release bearing

£100

Attached Files

•  23229BEE-547D-4218-84D3-461363DB28BB.jpeg   57.22K   5 downloads

[Lucas1988]

what engine is this for?

[pedrodomingo]

Hi,

What make clutch is this.
Is the diaphragm plate for a 1000 or a 1275.

Regards

Paul

[ggdtr5]

Hi there,
Sorry but I do not know which engine they are for - how do I tell the difference?

I bought them for my Pick up engine and I found out I had had a mix of the two types of clutches, (little wonder I couldn’t get the clutch to work) a verto clutch assembly on the engine and a pre- verto actuation assembly - Took me a while to realise this, eventually I decided to stay with the Verto clutch.

There is a part number/ label on the plate with the one attached with the flywheel it is a Borg & Beck 8067K/ 116-01-R.

The other one is still in its box and is a Borg & Beck with a p/n on the box of DCK61.

Hope this helps

Regards Graham

[toppers3933]

It’s a blue diaphragm so will be suitable for a standard 1275 or 998/1098/850. Hope this helps.

[ggdtr5]

thanks for the clarification