Car is a 62 Traveller...up graded to twin leading before my possession. Tin can master cylinder
I recently replaced all shoes, hoses, some hard lines and all wheel cylinders.
Installed drums and adjusted brakes.
Bled, bled, bled...fill cylinder, bled bled, fill cylinder etc. etc. ( level was never too low )
The brakes work....but pedal goes near to the floor on first push. Practical driving consists of several pumps for a good stop.
Is this a sign my master cylinder is pooched? No idea of it's age, but all brake hoses were very old...one front had collapsed and was causing brake to stay on....hence the brake job
( first one to suggest discs goes straight to bed with no supper )
Thanks