clear side repeaters?
i want to fit them without having to take the wheels off but at the moment i can fit my hand up the arch to reach the light fixtures.
how did others fir theirs?
How do you fit...
Started by
Dom
, Aug 10 2004 06:28 PM
8 replies to this topic
#1
Posted 10 August 2004 - 06:28 PM
#2
Posted 10 August 2004 - 09:10 PM
pull the side of the repeator closest to the door away from the wing towards the headlights. it shud come off. then twist the old lens anti clockwise from the wiring stalk and pull out of position. fitting the new ones is the reverse of the removal
#3
Posted 10 August 2004 - 09:50 PM
i just pulled em then twist the lense off like said above
#4
Posted 11 August 2004 - 06:25 AM
excellent thanks, ill do that later this morning
#5
Posted 11 August 2004 - 02:23 PM
right i had ago but it doesnt budge :sad: any tips?
#6
Posted 12 August 2004 - 07:41 PM
still wont budge my minis going to look a bit odd, maybe unique with orange side indicators and the rest being clear... id prefere it to be all clear but they wont come off, any sugestions?
#7
Posted 12 August 2004 - 10:59 PM
do it the hard way, take the wheel off.
#8
Posted 13 August 2004 - 11:12 PM
They should be really easy to remove. Just grab the lens and slide it to the right about 1/4" and pull it towards you quite sharply. Probably just loads of C**p on the gasket holding it in place. But as Lewis says, you may need to remove the wheel if they're stuck fast.
#9
Posted 14 August 2004 - 06:17 PM
they re certainly stuck fast
ive decided to keep my standard lenses and bulbs on for now, until i can get the right bulbs, it will be then ill come back and start messing around with fitting my lights.
thanks for your help.
ive decided to keep my standard lenses and bulbs on for now, until i can get the right bulbs, it will be then ill come back and start messing around with fitting my lights.
thanks for your help.
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users