Jump to content


Photo
- - - - -

6Th Dead Generator In 1.5 Years

engine electrical

  • Please log in to reply
18 replies to this topic

#1 ryanlogsdon

ryanlogsdon

    Mini Mad

  • Noobies
  • PipPipPipPip
  • 108 posts
  • Location: Pasadena

Posted 10 June 2019 - 06:34 PM

Hi Everyone,

 

My '62 has eaten her SIXTH generator in a year and a half.  The most recent two lasted 250 miles and 100 miles respectively.

 

First question: any idea why they could be lasting so little time?  I bought the last 2 generators brand new, and they've got a lifetime warranty, so I've just been swapping them out.

 

Second question: as a long-term solution, could I just remove the generator entirely and fabricate some device to keep the tension on the belt.  That way, the fan would still spin.  And between drives, my trickle charger would bring the battery back up.

 

Thanks,

Ryan



#2 Homersimpson

Homersimpson

    One Carb Or Two?

  • Members
  • PipPipPipPipPipPipPip
  • 797 posts
  • Location: Redditch

Posted 10 June 2019 - 07:29 PM

Do you know what on them is failing?

Have you measured the voltage output to see if it's in tolerance?

#3 Rorf

Rorf

    One Carb Or Two?

  • Members
  • PipPipPipPipPipPipPip
  • 857 posts
  • Location: Cape Town

Posted 10 June 2019 - 08:33 PM

Change over to an alternator.



#4 Macming

Macming

    Stage One Kit Fitted

  • Noobies
  • PipPipPip
  • 79 posts
  • Local Club: Miniclan

Posted 10 June 2019 - 09:48 PM

Expensive.. but If you want to keep the original look.... Just noticed it doesn't say anything about overseas postage, but you could alway ask. Might be worth a Google search where you are they might be available nearer home.  

 

Might be cheaper to get an Auto electrician to check it out first. Unless you've already done that. (We are talking about Electrical failure, not Mechanical,ie. bearings. )

 

https://www.ebay.co....I-/201748789273



#5 mini13

mini13

    Up Into Fourth

  • Members
  • PipPipPipPipPipPipPipPipPip
  • 3,794 posts

Posted 10 June 2019 - 09:56 PM

Bet it's a regulator box issue,

#6 gazza82

gazza82

    Up Into Fourth

  • Members
  • PipPipPipPipPipPipPipPipPip
  • 2,902 posts
  • Location: Bucks
  • Local Club: TMF+

Posted 10 June 2019 - 10:11 PM

Second question: as a long-term solution, could I just remove the generator entirely and fabricate some device to keep the tension on the belt.  That way, the fan would still spin.  And between drives, my trickle charger would bring the battery back up.


Don't think the battery would last long enough.

#7 Clubby77

Clubby77

    Learner Driver

  • Noobies
  • PipPip
  • 14 posts
  • Location: Cologne

Posted 11 June 2019 - 01:18 PM

There could be a lot of issues. To narrow it down we would need to know what on the generator broke!

Do you have a proper earth strap for the Block?

Is your charge cable the right size? Are connections corroded?

What is your Charge voltage? How does it react to load?

 

I am usually getting rid of the old DC Generators when they are faulty.

Alternators are way more reliable!

 

I wouldn't run without a generator!

Worst thing you can do to your battery.

 

 

A problem i used to have:

If you have a tuned engine you will run a way higher RPM then your generator is designed to handle.

Mine went through a couple of Alternators last year before i figured it out and got a larger wheel for it.

 

G Jan



#8 ryanlogsdon

ryanlogsdon

    Mini Mad

  • Noobies
  • PipPipPipPip
  • 108 posts
  • Location: Pasadena

Posted 11 June 2019 - 11:13 PM

 

If you have a tuned engine you will run a way higher RPM then your generator is designed to handle.

 

 

 

I tuned it up a few months back (2 generators ago).  New voltage regulator, spark plugs, HT leads, ignition coil.

 

I cleaned virtually every metal connection in the engine bay.

 

And I noticed it was idling higher than before.   So, yes, it's definitely got a higher RPM now.



#9 ryanlogsdon

ryanlogsdon

    Mini Mad

  • Noobies
  • PipPipPipPip
  • 108 posts
  • Location: Pasadena

Posted 11 June 2019 - 11:14 PM

Change over to an alternator.

 

Hi Rorf,

 

Could you recommend a how-to guide?



#10 ryanlogsdon

ryanlogsdon

    Mini Mad

  • Noobies
  • PipPipPipPip
  • 108 posts
  • Location: Pasadena

Posted 11 June 2019 - 11:17 PM

what on the generator broke!

 

I'll post a video of the sound ... don't know if that'd help at all.  Here's what I can say at the moment: there's copper shards in my engine bay, so something shaved the windings down!

 

When I turn the generator (having taken it out), there's a clicking sound once per revolution.



#11 ryanlogsdon

ryanlogsdon

    Mini Mad

  • Noobies
  • PipPipPipPip
  • 108 posts
  • Location: Pasadena

Posted 11 June 2019 - 11:18 PM

 

Mine went through a couple of Alternators last year before i figured it out and got a larger wheel for it.

 

G Jan

 

Could you link me to the part?  

 

Thanks!



#12 timmy850

timmy850

    Up Into Fourth

  • TMF+ Member
  • PipPipPipPipPipPipPipPipPip
  • 2,976 posts
  • Location: NSW, Australia
  • Local Club: MITG

Posted 12 June 2019 - 08:08 AM

It doesn't get much better than this video. Is your car currently positive or negative ground?

http://www.mossmotor...tor-conversion/



#13 viz139

viz139

    Super Mini Mad

  • Members
  • PipPipPipPipPipPip
  • 563 posts
  • Location: Ireland
  • Local Club: Irish Mini Owners Club

Posted 12 June 2019 - 08:45 AM

The last one sounds like mechanical rather than electrical damage. Over tightening the belt and ruining the bearings. What were the previous symptoms ? 



#14 ryanlogsdon

ryanlogsdon

    Mini Mad

  • Noobies
  • PipPipPipPip
  • 108 posts
  • Location: Pasadena

Posted 16 June 2019 - 08:39 PM

It doesn't get much better than this video. Is your car currently positive or negative ground?

http://www.mossmotor...tor-conversion/

 

I converted it to negative ground a while back.

 

And thanks for the video!



#15 ryanlogsdon

ryanlogsdon

    Mini Mad

  • Noobies
  • PipPipPipPip
  • 108 posts
  • Location: Pasadena

Posted 16 June 2019 - 08:46 PM

The last one sounds like mechanical rather than electrical damage. Over tightening the belt and ruining the bearings. What were the previous symptoms ? 

 

The first one died because the belt was too tight.

 

Since then, the belt's been given a good deal of play-- never enough to slip, but after watching a ton of videos on belt replacements, I've matched the amount of play.

 

The 2nd to last generator blew up internally, with copper fragments (dust size) blowing out.

 

And the most recent one died after a long test drive at high RPMs.







Also tagged with one or more of these keywords: engine, electrical

1 user(s) are reading this topic

0 members, 1 guests, 0 anonymous users