Looking for the two plastic halves with integral wire that the slip ring goes over on the steering column for the horn. Looking for a used source as I don’t believe these are being reproduced. Thanks
Mk1 Plastic Horn Switch Bits
Started by
Zami
, Sep 05 2019 03:21 AM
4 replies to this topic
#2
Itsaminithing
-
- TMF+ Member
-
- 851 posts
One Carb Or Two?
- Location: Berkshire
- Local Club: Not One Worth Mentioning
Posted 05 September 2019 - 11:17 AM
Part No. 57H5472 Rotor Assembly.... & as you state these don't seem to be made anymore.
New Old Stock ones do come up very occasionally on Ebay, otherwise try your local autojumbles (fairly sure this part was also used on the MGB & MG Spridget but you'd need to check this out for yourself).
Only other option is to buy the complete slip Ring assembly Part No. BCA4505 - they're not cheap but are readily available https://www.7ent.com...k1-str0069.html
#3
Zami
-
- TMF+ Member
-
- 145 posts
Mini Mad
- Location: Southport, NC
Posted 06 September 2019 - 11:30 PM
Thks
#4
alex-95
-
- TMF+ Member
-
- 6,017 posts
I am THE CLAMP MAKER
- Location: l
Posted 07 September 2019 - 10:29 PM
If you could find some dimensions or measure what you need it's be pretty simple to machine them and wouldn't cost that much. PM me if you need a hand.
#5
Zami
-
- TMF+ Member
-
- 145 posts
Mini Mad
- Location: Southport, NC
Posted 14 September 2019 - 02:22 AM
Thks for the offer Alex 95
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users
