https://www.amazon.c...op_mob_ap_share
Edited by HUBBA.HUBBA, 12 October 2019 - 09:20 PM.
Posted 12 October 2019 - 09:19 PM
Edited by HUBBA.HUBBA, 12 October 2019 - 09:20 PM.
Posted 12 October 2019 - 09:26 PM
Have seen a video on Facebook of them in use but have never used one personally. I would say if you are fitting
hundreds of rivets it may be worthwhile but if you are fitting a few dozen or so a standard pop riveter is good enough.
Posted 12 October 2019 - 09:28 PM
nope
Posted 12 October 2019 - 09:53 PM
I wish I had seen that a few weeks ago. I had to put around 170 x 4.2 mm pop-rivets into my glider trailer and it was very hard work with a standard hand-rivetter.
Posted 12 October 2019 - 09:59 PM
na. Hand rivet or air gun.
Posted 13 October 2019 - 08:15 AM
I've not used one of those, but have used a Pneumatic type. It certainly saved the hands and wrists for doing a large number in a short time frame.
This does look a nice gadget, could be OK, but appears a little cumbersome.
0 members, 1 guests, 0 anonymous users