Hi All,
my mini project has a seized clutch , I have tried to drive it in 4 th and braking heavily but no joy possible because brakes are poor .Anyway I have dismantled it and looking to see if there is any way to free off by leverage the clutch , I know I should take the complete assembly out and I will do that if I have to but I’m just wanting to get gears working so I can move car about , this engine will be getting replaced so don’t want to spend any money on it . I would like to know how much of the main shaft should be showing , it looks to me as if the clutch part that the hydraulic arm pushes is too far in , when assembled the arm moves freely in and out without any pressure on it . I’ll add photo hopefully I know the shaft cover / cup thing is not showing but I do have it .
i also have a new slave to fit as old one was also seized . have the engine jacked up as mounting off to can’t start engine at the moment ..
4F1355FB-8373-49A4-824B-71B18A223F72.jpeg 51.25K 2 downloads