10 replies to this topic

[Davemich]

In the photo I have taken do I have the cable guard the correct way?  IMG_0006.JPG   58.52K   4 downloads  IMG_0005.JPG   41.49K   4 downloads

[MiddletoM]

i think you have them on the wrong sides.

http://www.theminifo...dercoat/page-22

Theres a pic in that thread that shows the position.

[sonscar]

Upside down and left on right?cable passes under the arm from the pivot(probably)Steve..

[KTS]

Cable guard is correct, it's the back plates that are incorrect: brake cylinder should be at the bottom with adjuster at the top

[DeadSquare]

I like the colour.............IMHO far too many people paint their subframes black..............it's dark under there at the best of times, if you want to do something.

[Davemich]

I have the subframe upside down if that helps......

[DeadSquare]

I have the subframe upside down if that helps......

 

 

No,  sadly that doesn't help.

 

The back plates will have to be taken off and re assembled correctly, but don't worry, we won't tell anyone.

[GraemeC]

The brake assembly back plates are on the wrong sides - swap them over

[Davemich]

Guys, thank you for your advice, I agree the back plates are on the wrong sides, I will swop them over at the weekend. Didn't realise they were side specific, they not marked left or right. Thanks for your help.

[Davemich]

Thank you everyone for your advice, here are some pics of the work I done today.  IMG_0007.JPG   51.99K   0 downloads  IMG_0008.JPG   62.85K   0 downloads  IMG_0009.JPG   63.81K   1 downloads

[DeadSquare]

Look everybody.............That is much better !