Jump to content


Photo
- - - - -

Rear Opening Window Frame Screw


Best Answer Compdoc , 18 March 2020 - 08:20 PM

I believe these screws are countersunk 6-32 UNC x 1/4" long. These are used in some instances to hold the power supply into a standard PC case, so stealing one from there might do the trick.

Go to the full post


  • Please log in to reply
11 replies to this topic

#1 kartman

kartman

    Stage One Kit Fitted

  • Noobies
  • PipPipPip
  • 62 posts
  • Location: Ely, Cambs

Posted 17 March 2020 - 07:02 PM

Can anyone help with the below?
Thanks in advance

Attached Files



#2 mercenary62

mercenary62

    Speeding Along Now

  • Members
  • PipPipPipPipPip
  • 359 posts
  • Location: some where in the 70s
  • Local Club: mini clan

Posted 17 March 2020 - 08:06 PM

rivet wont work as theres no room mate il have a look at some old windows I have



#3 jaysmini1983

jaysmini1983

    Mini Mad

  • Members
  • PipPipPipPip
  • 217 posts
  • Location: bristol
  • Local Club: West Country Mini's

Posted 18 March 2020 - 08:22 AM

http://www.somerford...page=page&id=40

 

not sure if this would help. my flash player is not working so i cant see the images for the screws in thier locations.


Edited by jaysmini1983, 18 March 2020 - 08:28 AM.


#4 kartman

kartman

    Stage One Kit Fitted

  • Noobies
  • PipPipPip
  • 62 posts
  • Location: Ely, Cambs

Posted 18 March 2020 - 09:46 AM

rivet wont work as theres no room mate il have a look at some old windows I have

 

Cheers fella, much appreciated

 

 

http://www.somerford...page=page&id=40

 

not sure if this would help. my flash player is not working so i cant see the images for the screws in thier locations.

Thanks fella, had a look on there already and unfortunately there is no seperate listing for the particular screw i need.

 

Sure it must be available somewhere just trying to work out what size and thread etc it was before it was mullered



#5 jaysmini1983

jaysmini1983

    Mini Mad

  • Members
  • PipPipPipPip
  • 217 posts
  • Location: bristol
  • Local Club: West Country Mini's

Posted 18 March 2020 - 10:03 AM

might be worth calling somerford directly 



#6 Chris1275gt

Chris1275gt

    One Carb Or Two?

  • TMF+ Member
  • PipPipPipPipPipPipPip
  • 793 posts
  • Location: Reading

Posted 18 March 2020 - 11:11 AM

Why don't you take the screw out of the other side measure it then look for a selt tapping screw of the same size shank and cut it down to fit.

#7 kartman

kartman

    Stage One Kit Fitted

  • Noobies
  • PipPipPip
  • 62 posts
  • Location: Ely, Cambs

Posted 18 March 2020 - 02:31 PM

Why don't you take the screw out of the other side measure it then look for a selt tapping screw of the same size shank and cut it down to fit.

Car is right up against the wall that side, but if nobody knows on here, i shall move some stuff and turn it around and do as you suggest.



#8 mercenary62

mercenary62

    Speeding Along Now

  • Members
  • PipPipPipPipPip
  • 359 posts
  • Location: some where in the 70s
  • Local Club: mini clan

Posted 18 March 2020 - 03:04 PM

 

Why don't you take the screw out of the other side measure it then look for a selt tapping screw of the same size shank and cut it down to fit.

Car is right up against the wall that side, but if nobody knows on here, i shall move some stuff and turn it around and do as you suggest.

 

ive got some screws out of an old window mate



#9 Compdoc

Compdoc

    Super Mini Mad

  • TMF+ Member
  • PipPipPipPipPipPip
  • 609 posts
  • Location: Northants
  • Local Club: British Mini Club

Posted 18 March 2020 - 08:20 PM   Best Answer

I believe these screws are countersunk 6-32 UNC x 1/4" long. These are used in some instances to hold the power supply into a standard PC case, so stealing one from there might do the trick.



#10 Chris1275gt

Chris1275gt

    One Carb Or Two?

  • TMF+ Member
  • PipPipPipPipPipPipPip
  • 793 posts
  • Location: Reading

Posted 19 March 2020 - 11:01 AM

Can anyone help with the below?
Thanks in advance


I think this is what you're looking for.

https://www.ebay.co....UcAAOSw7I5TsBx4

#11 kartman

kartman

    Stage One Kit Fitted

  • Noobies
  • PipPipPip
  • 62 posts
  • Location: Ely, Cambs

Posted 19 March 2020 - 11:24 AM

I believe these screws are countersunk 6-32 UNC x 1/4" long. These are used in some instances to hold the power supply into a standard PC case, so stealing one from there might do the trick.

 

You are a hero! Thanks for working out the specs, I had tried to raid some old PCs here already but no such luck. Many thanks for your help, ordered some :)

 

 

Can anyone help with the below?
Thanks in advance


I think this is what you're looking for.

https://www.ebay.co....UcAAOSw7I5TsBx4

 

 

Great thanks buddy, have ordered these exact ones :)



#12 jaysmini1983

jaysmini1983

    Mini Mad

  • Members
  • PipPipPipPip
  • 217 posts
  • Location: bristol
  • Local Club: West Country Mini's

Posted 19 March 2020 - 02:28 PM

http://www.somerford...roducts_id=2253

they are line 15. not sure they are correct as they say for the catch. 

hopefully they work for you






1 user(s) are reading this topic

0 members, 1 guests, 0 anonymous users