5 replies to this topic

[Superdeluxe]

I'm using a mini spares evo001 cam and they recommend to use standard ratio rockers however the cylinder head will have double valve springs.

Can anyone recommend some standard ratio rockers to use with this combination? I assume anything that was standard fit might not be up to the job.

Cheers

Rich

Edited by Superdeluxe, 29 March 2020 - 08:41 PM.

[nicklouse]

Any. Take your pick. If the pressed steel ones you might want to put a bead of weld along the tops. Or you current ones will be fine.

[DeadSquare]

A series rockers are much stronger than they are often said to be.

[blacktulip]

When I rebuilt my old engine I treated myself to the cooper s spec A series rockers from minispares. Very nice and very in keeping.

[Spider]

Even in the standard Rockers, there was 3 Ratios !

Pressed ones give the highest Ratio.

[Superdeluxe]

Cheers for the advice. Will just re-use the originals