trying to get mini started again after fitting new front loom
i've connected up what i thought was everything, i get ignition light on, but on final key turn nothing.
I assume i need a starter relay, the old loom had one (yellow square box), i forgot to take enough pictures of old loom in-situ!
But i'm not 100% sure on how to wire up - even having looked at every post i can and every wiring diagram i can
So this is what i have:
Ignition Switch
brown - to starter motor solenoid
white - to fuse box
red/white - to starter relay ?
green/white - to fuse box
Starter Relay (yellow square box)
brown/red - to starter motor solenoid
black - to earth point
brown - not sure where this goes
red/white - to ignition switch ?
Ignition Coil
- black - to distributor
+ white - from fuse box ?
Starter motor solenoid - (on top of starter motor -not seperate item)
thick brown
brown/blue -- all 3 here connected together
brown
brown connected to big spade
there is a smaller spade - not sure what goes to this ?
Any help in fixing the above would be appreciated, let me know if you need more info..
thank you