3 replies to this topic

[nicholasp99]

Hi everyone!

 

i'm planning on converting by current 3 clock setup to a centre speedo once ive sorted my bosy work out and get onto fitting a loom. I'm looking for the measurements for the surrounding dash material. I'll be using a single dial binnacle with a centre speedo and it would be much appreciated if someone could let me know what the measurements are for all the surrounding material (the dash tray part and the backing to cover the inside of the dash).

 

Many thanks,

Nick (1991 racing green rover)

[owenlcr]

I know you can buy the pre cut material from newton commercial as I am just about to purchase these exact pieces from them. Other than that I could send you dimensions once I receive the items (approx 2 weeks)

[roberts]

Hi everyone!

 

i'm planning on converting by current 3 clock setup to a centre speedo once ive sorted my bosy work out and get onto fitting a loom. I'm looking for the measurements for the surrounding dash material. I'll be using a single dial binnacle with a centre speedo and it would be much appreciated if someone could let me know what the measurements are for all the surrounding material (the dash tray part and the backing to cover the inside of the dash).

 

Many thanks,

Nick (1991 racing green rover)

 

It sounds like you need one of our dash liner kits: LINK

 

 

Kind regards,
Andy @ Optimise Automotive

[surfblue]

Unless you really want just the single speedo look Id recommend the centre 3 clock oval binacle, oil pressure guage and temp guage are useful additions and to me its just the 'right' mini look,