But the listing said 'bolt on'
Inlet/exhaust Manifolds Not Level With Washer/bolt.
Started by
Harwoods
, Jul 19 2020 06:18 PM
engine
17 replies to this topic
#16
Posted 22 July 2020 - 11:26 PM
#17
Posted 23 July 2020 - 12:25 AM
Hi friend! I had the same problem and solved it with this.
Don't be afraid, you just need to have a good pulse, work in good light and file between 1mm and 1.5mm. When both surfaces are at the same height, place a solid thick washer (12A1211) that Minispares sells.
Good luck
Don't be afraid, you just need to have a good pulse, work in good light and file between 1mm and 1.5mm. When both surfaces are at the same height, place a solid thick washer (12A1211) that Minispares sells.
Good luck
#18
Posted 23 July 2020 - 07:46 AM
But the listing said 'bolt on'
It does bolt on - they just forgot to tell you that you'll need to mess about for it to work with the other components that you need to fit too!
Also tagged with one or more of these keywords: engine
Mini Technical Sections →
Problems, Questions and Technical →
Piston Rings - A-Series 998 Engine - Help RequiredStarted by WanaGo , 18 Apr 2024 engine |
|
|
||
Mini Technical Sections →
Problems, Questions and Technical →
Exhaust Choice 45Dcoe - Rc40?Started by lachlan1275gt , 13 Apr 2024 engine |
|
|
||
Mini Technical Sections →
Problems, Questions and Technical →
1071 Main Bearing Caps.Started by 246jaenick , 02 Apr 2024 engine |
|
|
||
Mini Technical Sections →
Problems, Questions and Technical →
Misfire - Ignition Fault Or Fuel Problem?Started by derekaka2sheds , 01 Apr 2024 electrical, engine |
|
|
||
Mini Technical Sections →
Problems, Questions and Technical →
Which Rocker ArmsStarted by mark the diver , 30 Mar 2024 engine |
|
|
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users