Hi All,
I’m just looking at ordering the parts for the rebuild of the rear subframe, but I’m not sure what rear wheel cylinders to get?
It’s a 1991 Cooper with the standard brake setup all round. I’m not really sure what the standard cylinder bore should be, but is this worth sticking with, or is there a different bore size that works better?
Any views or advice welcome!
Cheers!
Rear Wheel Cyl Size 1991 Cooper
Started by
Cooper Mac
, Sep 12 2020 08:33 PM
Best Answer richmondclassicsnorthwales , 13 September 2020 - 12:13 PM
GWC1102 is the recommended part, and yes, 3/4 in or 19mm is the bore.
Genuine AP are around £13.50 each.
Go to the full post
3 replies to this topic
#1
Posted 12 September 2020 - 08:33 PM
#2
Posted 12 September 2020 - 10:27 PM
I'm fairly sure it's a 3/4 or 19mm bore for my 1993 MY car.
#3
Posted 13 September 2020 - 12:13 PM Best Answer
GWC1102 is the recommended part, and yes, 3/4 in or 19mm is the bore.
Genuine AP are around £13.50 each.
#4
Posted 13 September 2020 - 05:52 PM
Great!
Thanks for your help guys!
Thanks for your help guys!
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users