Jump to content


Photo

Van Inner Wing


  • Please log in to reply
3 replies to this topic

#1 Geemax

Geemax

    Learner Driver

  • Noobies
  • PipPip
  • 21 posts

Posted 23 November 2020 - 02:33 PM

Having just undone years of previous bodges I am not left with much.

Question, is the part I have outlined in red a separate plate? It appears to be (or whats left of it is) but I don't see anything listed anywhere.

 

Attached Files



#2 sonikk4

sonikk4

    Twisted Paint Polisher!!!

  • Admin
  • PipPipPipPipPipPipPipPipPipPipPip
  • 15,884 posts
  • Name: Neil
  • Location: Oxfordshire

Posted 23 November 2020 - 03:20 PM

Make your own, that’s what I do. Remove it, use it as a template then fabricate it out of 0.9mm steel sheet.

#3 sonikk4

sonikk4

    Twisted Paint Polisher!!!

  • Admin
  • PipPipPipPipPipPipPipPipPipPipPip
  • 15,884 posts
  • Name: Neil
  • Location: Oxfordshire

Posted 23 November 2020 - 03:22 PM

Also just to add if you have already purchased the inner wing check to see if it’s not already welded to the wing.

I know the inner wings I fitted on Project Erm did not have them fitted, hence why I fabricated my own reinforcement plates.

#4 nev100

nev100

    Mini Mad

  • Just Joined
  • PipPipPipPip
  • 143 posts
  • Location: gloucester

Posted 23 November 2020 - 09:32 PM

Yes. I replaced the bulkhead front crossmember on my Van.

I got the replacement parts from M-machine. I did it in two halves.

As Doreen. She'll know.




0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users