apart from the obvious bulkhead box, is there anything else that needs to be done in the engine bay? for example marks mini had a bar fitted accross the engine and attached to the bodywork to stop it twisting. And also is engine steasy'S! a good idea?
engine bay mods
Started by
Brawlyrox
, Aug 17 2004 08:35 AM
4 replies to this topic
#1
Posted 17 August 2004 - 08:35 AM
#2
Posted 17 August 2004 - 07:51 PM
nick what have you got lol......
#3
Posted 17 August 2004 - 10:39 PM
when you put the bulkhead box in make sure you cut the corner of the crossmember aswell at an angle to give yourself enough clearence for the actuator and air intake pipe. it's the bit that's angled from the box towards the wiper motor in this pic.
Also it would be best to weld in a bracket for an ultimte steady as the standard mounting point for these get cut out. i use an adjustable top steady aswell to pitch the engine a little further forward to get some more air round the back of the turbo.
Other than that get ready for some fun
Nick.
Also it would be best to weld in a bracket for an ultimte steady as the standard mounting point for these get cut out. i use an adjustable top steady aswell to pitch the engine a little further forward to get some more air round the back of the turbo.
Other than that get ready for some fun
Nick.
Attached Files
#4
Posted 18 August 2004 - 02:30 PM
cheers thanks for your help!!
cnat wait
cnat wait
#5
Posted 19 August 2004 - 01:02 AM
i want turbo plzzzzzzz i want it i want it i realy do lol
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users