6 replies to this topic

[minidan]

today i took the seats out and part of the bulkhead to check something and i noticed this! (see pictures)

i think this is an obvious question , but is the car even drivable at ALL like this? i have no idea how long they have been broken , but fortunatly i have only taken the car out once since buying it...

2nd question is zcars the only place to buy new ones , if not where else, and how much cheers dan.

Attached Files

•  engine_mounts.JPG   493.23K   44 downloads
•  engine_mounts2.jpg   224.07K   33 downloads

[sqweaka]

just looks like a large exhaust bobbin to me take it to quckfit/ motorfactors see if they can match it!

[koss]

I find it strange that they have snapped Dan. But you should be able to get them from z-cars or car builder solutions.

 engine_mounts.jpg   11.25K   12 downloads

When you replace them, fasten them at the bottom first and make sure you don't have to bend or stretch them to fit.

Edited by koss, 02 February 2007 - 08:25 AM.

[minidan]

thanx,

why do you think they have broken? the engine still seems to be very solid and i cant move it by hand.

is the car undrivable until i get these replaced?

[koss]

I wouldn't recommend driving it, But if you have to be very careful. You don't want to go ripping the back of the gearbox off.
The front ones on mine had to be forced to line up with the holes on the head, so I modded them to fit comfortably.

[minidan]

 engine_mounts.jpg   11.25K   12 downloads

where did this pic come from koss?

[koss]

Car builder solutions Same as a mk 2 transit engine mounts