If you have one i need either a picture or accurate drawing of it please.
Needed
Started by
Dev
, Apr 23 2007 12:53 PM
9 replies to this topic
#1
Posted 23 April 2007 - 12:53 PM
#2
Posted 23 April 2007 - 06:46 PM
Dev mate, sorry didnt get back to you.
I do know some one who could Tig it no worries, but you would have to fabricate it first, otherwise it will cost a fortune. Id be using stainless, or mild steel at least.
I do know some one who could Tig it no worries, but you would have to fabricate it first, otherwise it will cost a fortune. Id be using stainless, or mild steel at least.
#3
Posted 23 April 2007 - 07:20 PM
El stig says he has a plan so will wait and see. but need to chat to you about vems at weekend and intercooler positioning
#4
Posted 30 April 2007 - 08:10 AM
I dont know if this is any help, but this is the Palmer Bros MPi-S engine:
Might be worth giving them a shout for information?
Might be worth giving them a shout for information?
Edited by nev_payne, 30 April 2007 - 08:10 AM.
#5
Posted 30 April 2007 - 11:28 AM
no i need a pic of the bit under the charger
#6
Posted 30 April 2007 - 02:15 PM
ahh sorry...nope couldnt realy fit any camera lens into the gaps in that pickups' engine bay thats for sure!
this any good? currently on ebay.
this any good? currently on ebay.
Edited by nev_payne, 30 April 2007 - 02:30 PM.
#7
Posted 30 April 2007 - 05:57 PM
Lol thats a funny looking manifold.
Sorry couldnt resist
Sorry couldnt resist
#8
Posted 30 April 2007 - 11:13 PM
....
he means the bit between supercharger and engine doesnt he? *cries*
I tried!
he means the bit between supercharger and engine doesnt he? *cries*
I tried!
#9
Posted 01 May 2007 - 09:51 AM
Thanks for your efforts nev its appriciated.
#10
Posted 01 May 2007 - 12:05 PM
the manifolds look similar to a 28/36 webber manifold or MPI manifold if that helps.
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users