Right, needed a new choke cable today, got one, fitted it. but doh, we cant get the left side nut / bracket thing on, so i have to hold the panel to pull the choke out.
any ideas on how to get into this easier, we gave up because it was cold and dark.
Choke panel thingy
Started by
Jordie
, Nov 30 2004 05:55 PM
3 replies to this topic
#1
Jordie
-
- TMF+ Member
-
- 13,564 posts
Traders Area Specialist Mod, North and Scotland Area Manager
- Name: Jordan
- Location: North East
Posted 30 November 2004 - 05:55 PM
#2
CharlieBrown
-
- Members
-
- 6,587 posts
Crazy About Mini's
- Location: Chester
- Local Club: TMF
Posted 30 November 2004 - 06:10 PM
You need to drop the heater down/take it off.
(Real easy, just 2 screws and 2 bolts (if I remember correctly))
Then lay upside down on the seat and have a go like that.
Ive done it twice now as the thing kept falling off.
(Maybe put some locktight on as well so it dosnt wiggle lose)
It is tuff to do but better than using your left foot to hold the panel in whilst pulling on the choke
(Real easy, just 2 screws and 2 bolts (if I remember correctly))
Then lay upside down on the seat and have a go like that.
Ive done it twice now as the thing kept falling off.
(Maybe put some locktight on as well so it dosnt wiggle lose)
It is tuff to do but better than using your left foot to hold the panel in whilst pulling on the choke
#3
Jordie
-
- TMF+ Member
-
- 13,564 posts
Traders Area Specialist Mod, North and Scotland Area Manager
- Name: Jordan
- Location: North East
Posted 30 November 2004 - 06:35 PM
cheers charlie
#4
vasi
-
- Members
-
- 897 posts
One Carb Or Two?
- Local Club: Minis 'n' Oatcakes
Posted 01 December 2004 - 07:16 PM
I gave up on mine and used superglue
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users
