If I have hairline cracks, between the valve seats on a cylinder head, is it scrap?
Hairline cracks
Started by
vasi
, Jan 06 2005 07:46 PM
7 replies to this topic
#1
Posted 06 January 2005 - 07:46 PM
#2
Posted 06 January 2005 - 07:50 PM
yup. :sad:
#3
Posted 06 January 2005 - 09:09 PM
^^As I'm reading this post you two have the exact same post count, kinda weird.
Look at the bright side, it gives you a good reason to upgrade.
Look at the bright side, it gives you a good reason to upgrade.
#4
Posted 07 January 2005 - 12:48 AM
Hehe its an avonbar stage 3 turbo head - cost me nothing so no loss
#5
Posted 07 January 2005 - 07:23 AM
It maybe possible to get it welded, check your local engineering shop
#6
Posted 07 January 2005 - 09:51 AM
just a thought, what about getting new seats put in, may actually machine out the cracks...
but probably only worth it if the head is of some special setup/porting.
but probably only worth it if the head is of some special setup/porting.
#7
Posted 15 January 2005 - 02:49 PM
Maybe worth a trip to cylinder heads ltd up the road then, see what they say.
#8
Posted 17 January 2005 - 03:27 PM
It can be reapired.... but the cost is often more than the value of the head!
So really its scrap!
alex
So really its scrap!
alex
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users