any tips for fitting opening quarters my car is a 84 city E it has no holes for the screws so any tips?
openin quarters
Started by
pierce
, Jan 06 2005 09:33 PM
1 reply to this topic
#2
Rob
-
- Members
-
- 241 posts
Mini Mad
Posted 13 January 2005 - 12:00 AM
You need two people.
Take out your unwanted windows and put your new seals in the apature. One person puts opening quarter in and level it up (hope this person has good eye sight!!!). When its all lined up the 2 hinges (bendy pieces of metal) should be touching the B post. The 2nd person inside puts a mark where the holes are then the quarter is removed and holes drilled. Put quarter back in and put screws in. it should all be level!. TAKE AS MANY PRECAUTIONS AS POSSIBLE. Always double check.
When quarter is back in get the other person to hold it in firmly again while the 2nd person marks the holes for the lever. MAKE SURE THE LEVER IS CLOSED. Then drill the holes a pop the screws in and hey presto!!!! opening rear quarters.
Take out your unwanted windows and put your new seals in the apature. One person puts opening quarter in and level it up (hope this person has good eye sight!!!). When its all lined up the 2 hinges (bendy pieces of metal) should be touching the B post. The 2nd person inside puts a mark where the holes are then the quarter is removed and holes drilled. Put quarter back in and put screws in. it should all be level!. TAKE AS MANY PRECAUTIONS AS POSSIBLE. Always double check.
When quarter is back in get the other person to hold it in firmly again while the 2nd person marks the holes for the lever. MAKE SURE THE LEVER IS CLOSED. Then drill the holes a pop the screws in and hey presto!!!! opening rear quarters.
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users
