i am fitting my inlet manifold as we speak, what pipe do i cut into to hook up the water headed bit? :erm:
Many thanks.
Me.
water heated inlet maifold
Started by
screech
, Feb 22 2005 05:59 PM
4 replies to this topic
#1
Posted 22 February 2005 - 05:59 PM
#2
Posted 22 February 2005 - 06:06 PM
The pipe which comes from engine on left hand side and runs into bulhead/heater.
Cut it in 2, connect a pipe up to one side of manifold and another to otherside and the remaining bit of pipe.
Cut it in 2, connect a pipe up to one side of manifold and another to otherside and the remaining bit of pipe.
#3
Posted 22 February 2005 - 09:12 PM
OR...
Just don't connect it like most people do anyway. It's pretty useless unless you live somewhere where temperatures are -20 all year long.
Only reason for that is to prevent carb icing in very cold weather, and all it does in other times is reduce power...
Just don't connect it like most people do anyway. It's pretty useless unless you live somewhere where temperatures are -20 all year long.
Only reason for that is to prevent carb icing in very cold weather, and all it does in other times is reduce power...
#4
Posted 22 February 2005 - 11:40 PM
am thinking of connecting mine up for winter...it's bloody freezing
#5
Posted 22 February 2005 - 11:43 PM
Yep. Will be connecting mine up too with the last few days of weather.
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users