No MG blocks ae the same as any other... The ONLY one which was reputed to be any different is the turbo block and I'm not 100% convinced of that.
And from the pictures... the cranks scrap..
Identifing An A Series Engine
Started by
hebrew
, Mar 06 2008 08:23 PM
20 replies to this topic
#16
Posted 09 March 2008 - 07:24 AM
#17
Posted 09 March 2008 - 09:48 AM
All A+ blocks are the same. The pistons and cam are all that would be different if MG spec. Turbos are reputed to have a heat treated crank, but that's a bit vague.
#18
Posted 09 March 2008 - 09:58 AM
And from the pictures... the cranks scrap..
Whats up with the crank, then?
#19
Posted 09 March 2008 - 10:24 AM
The journals look a bit too rough to regrind. You could take it along to a machine shop for a better opinion close up.
Edited by Ethel, 09 March 2008 - 10:24 AM.
#20
Posted 09 March 2008 - 12:02 PM
No, they're ok. Its just muck and oil.
It'd clean up ok.
It'd clean up ok.
#21
Posted 09 March 2008 - 12:14 PM
The thermostat housing is off a Morris Marina, I can tell you that.
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users