It's most likely to be your knuckle joints are wearing through, it happens fairly suddenly when they fail rather than gradually dropping down. Get a one piece polyurethane bush from Superflex for the engine steady, it's the best by far. You will need a bench vice to fit it.
that sinking feeling....
Started by
miniman5
, Apr 18 2005 08:16 PM
20 replies to this topic
#16
Posted 19 April 2005 - 05:30 PM
#17
Posted 19 April 2005 - 07:46 PM
ok well what do i need to do then? i did have my guitar i nthe car wich ways a lot its solid wood and i had a solid case in there to
#18
Posted 19 April 2005 - 09:24 PM
start a fire :tongue:
no replace the ball and the cup on the end of the alloy cone below the rubber spring
no replace the ball and the cup on the end of the alloy cone below the rubber spring
#19
Posted 20 April 2005 - 03:12 PM
is this hard?
#20
Posted 20 April 2005 - 03:32 PM
no but you will need a spring compresser
#21
Posted 20 April 2005 - 04:23 PM
ok well befor ei go spending all my money we will go out in it without teh geetar in and see if it stif does it if it dont then ile leave it
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users