Hi all
After the problems with my slave cylinder, it is now the turn of the master cylinder to be a pain
After putting the whole system back togther and it still not working, i took the master cylinder apart and the plunger looks like it has a piece missing
Not having a manual i cannot be sure but i assume that there should some kind of rubber grommet or washer at the end to push the fluid up and into the pipe?
Can anyone advise if this is correct ?
Thanks
Clutch Master Cylinder
Started by
jimmerjammer
, Mar 09 2008 01:08 PM
7 replies to this topic
#1
Posted 09 March 2008 - 01:08 PM
#2
Posted 09 March 2008 - 01:27 PM
There should be a cup seal and retainer.
#3
Posted 09 March 2008 - 02:59 PM
There should be a cup seal and retainer.
I got a washer type thing and a circle pinch clip?
#4
Posted 09 March 2008 - 03:03 PM
There should be a cup seal and retainer.
I got a washer type thing and a circle pinch clip?
well that's the retainer so where the cup seal gone?
#5
Posted 09 March 2008 - 03:11 PM
There should be a cup seal and retainer.
I got a washer type thing and a circle pinch clip?
well that's the retainer so where the cup seal gone?
Yeah i would love to know that !
As mentioned in previous posts, all the clutch parts were in a carrier bag in the boot !
Am i right in thinking that you can buy repair kits ?
#6
Posted 09 March 2008 - 03:20 PM
Yeah, your local motor factors may even have one.
#7
Posted 09 March 2008 - 03:21 PM
Yeah, your local motor factors may even have one.
I wouldn't got to the hassle of rebuilding hydraulics without one they are that cheap.
#8
Posted 09 March 2008 - 03:23 PM
Brilliant
Thanks for teh help and advise
Thanks for teh help and advise
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users