Jump to content


Photo
- - - - -

Engine Spec: Optimistic??


  • Please log in to reply
5 replies to this topic

#1 mighty_mini

mighty_mini

    Sambo Spoon

  • Members
  • PipPipPipPipPipPipPipPipPip
  • 2,499 posts

Posted 26 April 2005 - 07:42 PM

What sort of power do you think i could get from my current spec'd engine?

1340 Metro Turbo
Gasflowed, P & P head, shaped chambers
STD NGK Turbo Plugs
1.5 rollertip-rockers
Belt driven turbo cam
Intercooler (600mmx300mmx75mm)
Green Cotton air filter
maniflow 2" system to a Titanium GSX-RR exhaust
2-stage boost from 4psi to 8psi at 3000rpm
JK straightcut drops (1.04 ratio)


i would be happy with 130bhp, any more would be a bonus, this possible?

#2 TimS

TimS

    Mini Doctor

  • Members
  • PipPipPipPipPipPipPipPipPip
  • 2,712 posts
  • Local Club: TMF

Posted 27 April 2005 - 09:04 AM

is it a 1330?+60 thou or is the crnak stroked?

#3 Wil_h

Wil_h

    Up Into Fourth

  • Members
  • PipPipPipPipPipPipPipPipPip
  • 3,244 posts

Posted 27 April 2005 - 09:11 AM

8psi with a cam and slight head mods. I'd guess at 120bhp

#4 TimS

TimS

    Mini Doctor

  • Members
  • PipPipPipPipPipPipPipPipPip
  • 2,712 posts
  • Local Club: TMF

Posted 27 April 2005 - 09:12 AM

also what cam are you using?power will also depend on voalve sizes and the work done on the head

#5 Turbo Phil

Turbo Phil

    Up Into Fourth

  • TMF+ Member
  • PipPipPipPipPipPipPipPipPip
  • 2,418 posts
  • Location: Cumbria
  • Local Club: Cumbria Classic Mini Club

Posted 28 April 2005 - 07:25 AM

120-130hp depending on cam choice. Is it just the standard "Turbo" cam ?

Phil. :ohno:

#6 Turbo Nick

Turbo Nick

    Up Into Fourth

  • Members
  • PipPipPipPipPipPipPipPipPip
  • 2,913 posts
  • Local Club: Turbominis.co.uk

Posted 28 April 2005 - 09:10 AM

mine was 112bhp with a similar spec to yours so i'd say round about the same...all depends on which rollers you use though :ohno:

mine was 99bhp@wheels last time it was on the rollers at spams. going again tomorrow though so maybe in for a little more, fingers crossed.




1 user(s) are reading this topic

0 members, 1 guests, 0 anonymous users