Jump to content


Photo

Just Got A Mini


  • Please log in to reply
11 replies to this topic

#1 Mini Man Sam

Mini Man Sam

    Mini Mad

  • Members
  • PipPipPipPip
  • 158 posts

Posted 13 June 2005 - 05:24 AM

Hi there. Just picked up a nice little Mini at the weekend. 1990 998 Mayfair, white, 4 spots, chrome kit, union jack on roof and rebadges as a Cooper. It's actually for my lad but I am going to be driving it for a while as he is not 17 til Jan but he has wanted one for ages (so have I for that matter) and the prices seem to have gone up rather over the last few months so I thought we had better get one before they get into the silly money.

Have a few questions about it which I will ask here if no one minds and then if I don't get too much of a response will repeat in technical section.

1. How to cure a squeeking alternator. Only at tick over but quite loud. Is spraying it inside and out with WD40 OK.

2. The tops of the doors seem to have bent out slightly causeing them not to seal prperly and there is a small crack where the window frame joins the door panel at the rear of the passenger door and the fron of the drivers door, both on the inside. How easy is it to realign and weld these.

3. Squeeking gear lever linkage housing. Assume one of the mounts are loose or need relacing. How easy to do.

I used to do a lot of my own car maintenance but have not done a lot recently due to modern cars being so damn complicated. Can't wait to get stuck back into something which is a bit more basic.

Cheers in advance and there will probably be more questions later.

PS forums are great places for info :(

#2 Dom

Dom

    Moved Into The Mazda

  • TMF+ Member
  • PipPipPipPipPipPipPipPipPipPipPip
  • 10,685 posts
  • Location: Nürburgring

Posted 13 June 2005 - 07:22 AM

hello and welcome to the mini forum

people will be able to answer your questions so you've come to the right place (not me ive got to dash :( )

enjoy the site

#3 Jammy

Jammy

    Moved Into The Garage

  • Members
  • PipPipPipPipPipPipPipPipPipPipPip
  • 25,397 posts

Posted 13 June 2005 - 07:54 AM

Hey, glad to hear you've gone and bought a real car after years of driving those plastic things!! :tongue: I've heard about these fathers that buy minis and then get their son something else too drive because they can't give the mini up!!

With the alternator, it sounds a bit like it maybe the fan belt. Check that the fan belt isn't worn, if it is, replace it. If it isn't, its simple just to slacken the bolt that fixes the alternator to the bracket, pull the alternator out a bit and then tighten the bolt back up.

With the gear linkage housing, sounds like it maybe the mounts.

I'll let someone with more knowledge handle the doors question.

#4 Mini Man Sam

Mini Man Sam

    Mini Mad

  • Members
  • PipPipPipPip
  • 158 posts

Posted 13 June 2005 - 08:51 AM

Cheers for the reply

The squeeking definiatley sounds like metal on metal rather than rubber squeeling but will have another look when I get home.

#5 jimbo_edmondo

jimbo_edmondo

    One Carb Or Two?

  • Members
  • PipPipPipPipPipPipPip
  • 1,198 posts

Posted 13 June 2005 - 08:51 AM

Hiya, welcome.

Yea it sounds like mounts on the gear remote not difficult at all, just a couple of bolts, they may be a bit dirty though!

I'll leave the doors as well even though i have the same problem so I'll be looking out for an answer! When i first got mine i was a bit lazy and decided to go through the dreaded car wash, i got a wash at the same time ahhhhhhhh!!!! :(

And the alternator doesn't mind WD40 however as jammy said could be fan belt...or it could be the alternator bearings, lots of alternators sat around in scrapyards. But then if its otherwise in good condition i'm sure it won't cost much to get new bearings put in.

Edited by jimbo_edmondo, 13 June 2005 - 08:54 AM.


#6 Bungle

Bungle

    Original Spamster

  • Members
  • PipPipPipPipPipPipPipPipPipPipPip
  • 28,971 posts
  • Location: Cornwall
  • Local Club: cornish mini club

Posted 13 June 2005 - 11:12 AM

hello and welcome

will your son ever get to drive the mini ?

#7 mini_sam

mini_sam

    One Carb Or Two?

  • Members
  • PipPipPipPipPipPipPip
  • 1,381 posts

Posted 13 June 2005 - 11:31 AM

y0o0o0o0o welcome to the forum, people are going to be getting mixed up with out names lol :( difference is, you actually have your mini! :angry: Good Luck!

#8 Mini Man Sam

Mini Man Sam

    Mini Mad

  • Members
  • PipPipPipPip
  • 158 posts

Posted 13 June 2005 - 11:47 AM

Sorry about that mini sam, obviously didn't realize you had a similar name. When are you hoping to get your mini.

Bungle - he hopes so!!!!

#9 CharlieBrown

CharlieBrown

    Crazy About Mini's

  • Members
  • PipPipPipPipPipPipPipPipPipPip
  • 6,587 posts
  • Location: Chester
  • Local Club: TMF

Posted 13 June 2005 - 04:05 PM

Welcome to the site.

if you post thoese questions in the Technical and Problem section you may get a quicker responce from the mini docs.

#10 Mini Man Sam

Mini Man Sam

    Mini Mad

  • Members
  • PipPipPipPip
  • 158 posts

Posted 13 June 2005 - 05:47 PM

Cheers will do :(

#11 mini_sam

mini_sam

    One Carb Or Two?

  • Members
  • PipPipPipPipPipPipPip
  • 1,381 posts

Posted 13 June 2005 - 06:22 PM

its ok lol, im not sure when i am getting my mini, i have been looking for agggesssss now but just havent found one which is right for me, maybe im just picky!! :(

#12 jimbo_edmondo

jimbo_edmondo

    One Carb Or Two?

  • Members
  • PipPipPipPipPipPipPip
  • 1,198 posts

Posted 13 June 2005 - 08:48 PM

if you post thoese questions in the Technical and Problem section you may get a quicker responce from the mini docs.

And more indepth and more likely to be right lol!




1 user(s) are reading this topic

0 members, 1 guests, 0 anonymous users